Share on facebook
Share on google
Share on twitter
Share on linkedin

How to Clean an Oil Diffuser

Oil diffusers need routine maintenance. Occasional deep clean makes it last longer. Learn how to care for this machine. Then, you will be rewarded with the best possible aromatic experience.

Moreover, a well-maintained diffuser can function at its best. As you see, it’s not just about the oils. It’s more about how you keep your oil diffuser dirt-free.

Before anything else, make sure you refer to the manufacturer’s manual for a specific model. Some oil diffusers have unique designs that require extra precautions. Follow instructions to keep them dry and safe. Read on and learn how to clean your machine and keep it in good condition.

Routine Cleaning for your Oil Diffuser

After diffusing oil, make it a habit to remove the remaining water from your machine’s reservoir. Leaving it can cause corrosion. It can also keep oil residues that can clog crucial areas of your diffuser. Old oil residues can affect the scent output the next time you diffuse the oil.

When doing routine cleaning, use a 1:1 water and white vinegar solution. It disinfects and cleanses the reservoir naturally. It also ensures no oil residue sticks around the corners. Next, wipe it down with a dry cloth. You can also use a cotton ball and allow it to dry between uses.

Do not reassemble while it is wet because it harbors moisture from the air. The next time you use it, your oil diffuser will smell brand new.

You may also use the same method for ultrasonic diffusers. It uses water and ultrasonic vibrations to disperse essential oils into the air. It has a perfect size for any room. That means it doesn’t take much time to clean it regularly. It is very user-friendly and much easier to maintain.

Steps to Deep Clean Your Oil Diffuser

If you haven’t cleaned your oil diffuser for quite some time, it needs some deep cleaning. Here are some steps you can follow to safely deep-clean your oil diffuser.

Unplug Your Diffuser

Remember to unplug your diffuser before cleaning. Leaving it plugged while cleaning will put you at risk of electrocution. Next, remove any oil residue and fill the reservoir with water. We recommend that you use filtered water for this step. Tap water may contain invisible particles and contaminants. They can affect the quality of the scent.

When filling it with water, make sure that you don’t fill it past the fill line. It will destroy your diffuser’s ability to cycle the liquid properly.

Add Pure White Vinegar Into the Water

Add ten drops of vinegar just enough to create an effective cleaning solution. Do not over-pour the vinegar as the smell may linger later on. Vinegar helps remove oil residue and other stains. When not removed, they can stick onto the reservoir’s surface.

However, be careful when cleaning oil diffusers with digital displays. For instance, aroma diffusers with time display need extra precaution for cleaning. Make sure you don’t hit the digital composition with water as it might slowly corrode its interior. Also, make sure that the reservoir is completely dry before putting it back on.

Scrub Tight Spots

You can buy a cleaning brush for diffusers. Alternatively, you can use a cotton swab to remove deposits that have thickened over time. Also, scrub particles that linger in the corners of the diffusers. Dry the whole interior and move on to the next step.

Rinse and Dry

Run clean or filtered water on the reservoir. Next, dry it using a cotton cloth. Do not use hard, knitted cloth as it might leave some scratches on the reservoir. Allow the diffuser to dry. You can leave it open in the air before adding any oil.

Oil Diffuser Troubleshooting

Even though you clean your oil diffuser regularly, your diffuser just stops functioning. Don’t worry this is not an unusual scenario. Here are a few common problems and how you can fix them.

Overheating Water

Sometimes, water can overheat because the diffuser is too full. In this case, you need to empty your diffuser. Just unplug it and let it cool for a while. Then, you can refill it back with water.

If your diffuser does not start after doing so, it has likely been damaged by overfilling. At this point, you need to have it checked by a technician. If the water is not overheating or excessive, there could be a problem with the fan intake.

Check the fan if there is obstruction. Clean any particle that might have obstructed the fan blades. Then plug it back on and it should start functioning.

The Diffusion is Poor

If you’re using your diffuser the wrong way, there is a high chance that your fan inlet is blocked. You should clean the passage immediately. This issue usually happens in regular diffusing machines. The problem is caused by dried-up oils that prevent proper diffusion.

The Indicator Light is Flashing

If your diffuser’s light keeps on flashing and it doesn’t turn on, you just reset it. Unplug your diffuser and empty it. Clean the reservoir and dry it. Allow it to cool down before replacing it with clean water. Then, plug it back on. If it still refuses to start, consult your manufacturer’s manual. Otherwise, you might need to have it checked with a technician.

Clean and Efficient Oil Diffuser

There you go. Cleaning an oil diffuser is easy-breezy when you know the steps. It is no surprise that oil diffusers can help brighten your day. Nowadays, you can see many types of oil diffusers. Some come with very creative designs. Some diffusers come with a digital clock to tell when it is time for an important matter. Other diffusers come with a very exciting lamp.

The key to a well-functioning oil diffuser is regular maintenance and proper cleaning. Keeping your oil diffuser clean ensures the continued benefits of essential oils. Breathe and enjoy uninterrupted aromatherapy in your own home or office. We hope that you enjoyed reading our cleaning tips. Good luck!

Scroll to Top